Rope Grab Fall Arrester | BeamTeam Safety

Products / Fall Protection / Rope Grab Fall Arrester

Fall Arrester
Rope Grab
Anchorage Lifeline

Fall Arrester

BeamTeam Rope grab fall arrestor is a device that can be used for restricted area where worker is moving up and down and fall clearance is very less. It help worker from falling during ascent or descent,it locks immediately when fall occur.

Features of BeamTeam Rope grab fall arrestor
Short fall distance,low impact force of less than 6kn.failsafe design.
Work on 14-16 mm dia 3 strand anchorage line.
Gravity locking mechanism to prevent incorrect use.
Double security locking system

Meets : EN 353-2:2002

(Class A) for basic Fall Arrest
This harness has one Dorsal D ring and is designed to support the body in comfortable position even after a fall .

(Class L) for Tower Climbing
This harness is Used for ladder and Tower climbing, It is equipped with 2 D ring at the front of two shoulder straps for Tower Climbing (with Fall Arrester) and one dorsal D Ring for Fall Arrest.

(Class D) for Controlled Descent
This Harness has Front D ring that is used for controlled descent form height, One Dorsal D ring for Fall Arrest.

(Class P) for Work Positioning
This harness has 2 Lateral D ring for work positioning, worker can work with both hands free. One D Ring is used for fall Arrest.

(Class E) for Entry and Exit in Confined area.
This harness has 2 sliding D Ring on each shoulder strap to help easy entry and exit into confined spaces. One back D Ring to be used for Fall Arrest.

Adjustable thigh -strap and sliding plates for easy adjustment of chest strap. Dorsal D ring for Fall Arrest.

Adjustable thigh -strap and sliding plates for easy adjustment of chest strap. 2 Chest attachment textile loops and a Dorsal D ring for fall Arrest.

Adjustable shoulded and thigh strap, and sliding plates for easy adjustment of chest strap. Dorsal D ring for Fall Arrest.

Adjustable shoulder and thigh -strap.
Two Chest attachment textile loops and a Dorsal D Ring for fall Arrest.

Adjustable shoulded and thigh strap, and sliding plates for easy adjustment of chest strap. 2 chest attachment D-Ring a Dorsal D Ring for Fall Arrest.

Adjustable thigh -strap. 1 chest attachment D-Ring a Dorsal D Ring for Fall Arrest.

1. Adjustment buckle for ease to use with single hand.
2. Label Label and marking of the harness enclosed in polyethylene tube to prevent fading in sunlight and water.
3. Sternal D Ring for Fall Arrest.
4. Ventral D Ring for Rescue and rope access.
5. Automatic buckle with pull grip for easy adjustment for best fit.

6. I D PLATE Dorsal webbing holding cross Plate for holding D Ring in place even after a Fall.
7. Shoulder PAD Fully Padded for better comfort, shock absorption and air circulation.
8. Work Postioning Belt 2 Lateral D Rings attached in waist belt for work postioning.
9. Thigh Strap Fully Padded Straps with automatic buckle.

Two Lateral D ring for work positioning
One Ventral D Ring for Rope access
Adjustable and soft padded thigh strap and waist belt for best possible comfort
Usage- Work positioning ,Restraint System and rope access work
Meets EN 358:2000 & EN 813

Wide Comfort pad to support working for a longer period
Fully Adjustable
Two Lateral D ring for work positioning
Tool Holding webbing loops
Meets EN 358:2000

Narrow Comfort Pad for sufficient support
Fully Adjustable
Two Lateral D ring for work positioning
Tool Holding webbing loops
Meets EN 358:2000

Made of 14 mm dia polyamide 3 strand twisted rope with maximum length 2 mtrs
Rope grab adjuster for length Adjuster
Both End connected with Carabiner BTHK12 & BTHK13
Meets EN 358:2000

SNAP HOOK- Steel Alloy

Opening-18mm. BS-23kn

SCAFFHOLD HOOK

Forged Steel Alloy

Opening-55mm. BS-20kn

SCREW LOCK
CARABINER-Steel Alloy

Opeing-17mm. BS-22kn

Quarter Turn

CARABINER-Steel Alloy

Opening-18mm. BS-22kn

SPRING Hook

alloy steel gate 20 mm

BS 20 Kn

Screw Hook-Steel Alloy

Opening-20mm. BS-20kn

Energy Absorbing Double 3 strand Twisted Polyamide Rope Lanyard 12mm Dia With 2 Scaffhold Hook BTHK11 & One Carabiner BTHK12

Energy Absorbing double braided Rope Lanyards 12mm Dia With 2 Scaffhold Hook BTHK11 & One Carabiner BTHK12

Energy Absorbing Double Webbing Lanyards 44 Mm Dia With 2 Scaffhold Hook BTHK11 & One Carabiner BTHK12

BeamTeam introduces Horizontal Anchorange lifeline BT 2000 Made of 30 mm Polyester Webbing( L e n g t h 2 0 m t r s . ) equipped with Rachet Tensioner that allows easy tensioning of lifeline between both ends. It is attached with a bag, that can be easily assembled. Both ends are provided with Quarter Turn Carabiners.(BT -HK 13) Meets: EN 795 Class B

Used for Access in Confined Area
Fully Adjustable aluminum telescopic legs
2 auxillary eye bolts and mounted pulley as attachment point
Allumunium cast alloy head
Anchorage point strength more than 10 kn
Weight- 14 kg
Provide with Bag
Compliance with EN 795 Class B

Used for lowering of personnel or material into confined spaces.
Lifting load-125 kgs
Length- 20 mtrs- 30 mtrs
Equiped with bolting fixtures for robust fitting on the Tripod
Conforms to EN 1496:2006(Class A)

To be used for vertical ascent and descent. Ergonomic and comfortable working chair. Tested as per EN 1498

To be used for rescue of Injured Personnel

Works on 10.5-11 mm kernamental rope
Used for descent on single rope.
Works on unique self braking system which initiates the brake as soon as the handle is released or clasped tightly.
Conforms EN 341-Class A

Kernamental rope is made of Polyamide.
Available in various length with maximum length of 220 mtrs
Available in Dia of 9 mm,10.5 mm, 12 mm

Made up of polyamide.
Available in various length with maximum length of 200 mtrs.
Available in Dia of 12 mm,14 mm.

Art No– BT 70A	Art No– BT 70B	Art No– BT 70C
Beamteam 14-16 mm Three Strand twisted polyamide anchorage line is used with Rope grab Fall Arrester.
Art No– BT 1010	Art No– BT 71
BeamTeam twisted polyamide anchorage line is available in 10, 20,30,40,50,100 meter

Rope Grab

Horizontal Anchorage Lifeline

BeamTeam introduces Horizontal Anchorange lifeline BT 2000 Made of 30 mm Polyester Webbing equipped with Rachet Tensioner that allows easy tensioning of lifeline between both ends. It is attached with a bag, that can be easily assembled. Both ends are provided with auto locking karabiners.(BTHK13)
Meets: EN 795 Class B

Fall Arrester

Art No– BT 70A

Art No– BT 70B

Art No– BT 70C

Art No– BT 1010

Art No– BT 71

Rope Grab

Horizontal Anchorage Lifeline

Art No-BT 2000

CORPORATE OFFICE

Quick Links

Likes Us On Facebook

Upcoming Events