Hooks & Connectors
All BeamTeam range of Hooks and Connectors are made of Alloy
Steel and Stainless Steel.each have basic important safety feature of two deliberate consecutive manual action opening, They all have minimum breaking strength of 23 kn,and are provided with zinc electroplating for extended corrosion resistance.
Meets EN 362:2004
(Class A) for basic Fall Arrest
This harness has one Dorsal D ring and is designed to support the body in comfortable position even after a fall .
(Class L) for Tower Climbing
This harness is Used for ladder and Tower climbing, It is equipped with 2 D ring at the front of two shoulder straps for Tower Climbing (with Fall Arrester) and one dorsal D Ring for Fall Arrest.
(Class D) for Controlled Descent
This Harness has Front D ring that is used for controlled descent form height, One Dorsal D ring for Fall Arrest.
(Class P) for Work Positioning
This harness has 2 Lateral D ring for work positioning, worker can work with both hands free. One D Ring is used for fall Arrest.
(Class E) for Entry and Exit in Confined area.
This harness has 2 sliding D Ring on each shoulder strap to help easy entry and exit into confined spaces. One back D Ring to be used for Fall Arrest.
Adjustable thigh -strap and sliding plates for easy adjustment of chest strap. Dorsal D ring for Fall Arrest.
Adjustable thigh -strap and sliding plates for easy adjustment of chest strap. 2 Chest attachment textile loops and a Dorsal D ring for fall Arrest.
Adjustable shoulded and thigh strap, and sliding plates for easy adjustment of chest strap. Dorsal D ring for Fall Arrest.
Adjustable shoulder and thigh -strap.
Two Chest attachment textile loops and a Dorsal D Ring for fall Arrest.
Adjustable shoulded and thigh strap, and sliding plates for easy adjustment of chest strap. 2 chest attachment D-Ring a Dorsal D Ring for Fall Arrest.
Adjustable thigh -strap. 1 chest attachment D-Ring a Dorsal D Ring for Fall Arrest.
1. Adjustment buckle for ease to use with single hand.
2. Label Label and marking of the harness enclosed in polyethylene tube to prevent fading in sunlight and water.
3. Sternal D Ring for Fall Arrest.
4. Ventral D Ring for Rescue and rope access.
5. Automatic buckle with pull grip for easy adjustment for best fit.
6. I D PLATE Dorsal webbing holding cross Plate for holding D Ring in place even after a Fall.
7. Shoulder PAD Fully Padded for better comfort, shock absorption and air circulation.
8. Work Postioning Belt 2 Lateral D Rings attached in waist belt for work postioning.
9. Thigh Strap Fully Padded Straps with automatic buckle.
- Two Lateral D ring for work positioning
- One Ventral D Ring for Rope access
- Adjustable and soft padded thigh strap and waist belt for best possible comfort
- Usage- Work positioning ,Restraint System and rope access work
- Meets EN 358:2000 & EN 813
- Wide Comfort pad to support working for a longer period
- Fully Adjustable
- Two Lateral D ring for work positioning
- Tool Holding webbing loops
- Meets EN 358:2000
- Narrow Comfort Pad for sufficient support
- Fully Adjustable
- Two Lateral D ring for work positioning
- Tool Holding webbing loops
- Meets EN 358:2000
- Made of 14 mm dia polyamide 3 strand twisted rope with maximum length 2 mtrs
- Rope grab adjuster for length Adjuster
- Both End connected with Carabiner BTHK12 & BTHK13
- Meets EN 358:2000
SNAP HOOK- Steel Alloy
Opening-18mm. BS-23kn
SCAFFHOLD HOOK
Forged Steel Alloy
Opening-55mm. BS-20kn
SCREW LOCK
CARABINER-Steel Alloy
Opeing-17mm. BS-22kn
Quarter Turn
CARABINER-Steel Alloy
Opening-18mm. BS-22kn
SPRING Hook
alloy steel gate 20 mm
BS 20 Kn
Screw Hook-Steel Alloy
Opening-20mm. BS-20kn
Energy Absorbing Double 3
strand Twisted Polyamide
Rope Lanyard 12mm Dia
With 2 Scaffhold Hook
BTHK11 & One Carabiner
BTHK12
Energy Absorbing double braided Rope Lanyards 12mm Dia With 2 Scaffhold Hook BTHK11 & One Carabiner BTHK12
Energy Absorbing Double Webbing Lanyards 44 Mm Dia With 2 Scaffhold Hook BTHK11 & One Carabiner BTHK12
BeamTeam introduces Horizontal Anchorange lifeline BT 2000 Made of 30 mm Polyester Webbing( L e n g t h 2 0 m t r s . ) equipped with Rachet Tensioner that allows easy tensioning of lifeline between both ends. It is attached with a bag, that can be easily assembled. Both ends are provided with Quarter Turn Carabiners.(BT -HK 13) Meets: EN 795 Class B
- Used for Access in Confined Area
- Fully Adjustable aluminum telescopic legs
- 2 auxillary eye bolts and mounted pulley as attachment point
- Allumunium cast alloy head
- Anchorage point strength more than 10 kn
- Weight- 14 kg
- Provide with Bag
- Compliance with EN 795 Class B
- Used for lowering of personnel or material into confined spaces.
- Lifting load-125 kgs
- Length- 20 mtrs- 30 mtrs
- Equiped with bolting fixtures for robust fitting on the Tripod
- Conforms to EN 1496:2006(Class A)
To be used for vertical ascent and descent. Ergonomic and comfortable working chair. Tested as per EN 1498
To be used for rescue of Injured Personnel
- Works on 10.5-11 mm kernamental rope
- Used for descent on single rope.
- Works on unique self braking system
which initiates the brake as soon as the
handle is released or clasped tightly.
- Conforms EN 341-Class A
- Kernamental rope is made of Polyamide.
- Available in various length with
maximum length of 220 mtrs
- Available in Dia of 9 mm,10.5 mm,
12 mm
- Made up of polyamide.
- Available in various length with
maximum length of 200 mtrs.
- Available in Dia of 12 mm,14 mm.
